Innovative additive solutions for road pavement construction
Our range of asphalt additive products are the result of various collaborations with a number of the worlds leading road and construction material innovators, to provide a portfolio of innovative solutions for the road building and construction industries.
The antistripping agents are complex chemical surface-active substances, that guarantee a perfect adhesion of the bitumen film on the aggregate surface.
The hot rejuvenators modify the aged bitumen's chemical and physical structure in the milled mixes and they reduce the rigidity of the new coat, produced with a milled material addition.
The cold rejuvenators modify the aged bitumen's chemical and physical structure in the milled mixes and they reduce the rigidity of the new coat, produced with milled material.
Traditional Flux Oils
The traditional flux oils modify the bitumen's physical structure, lower the viscosity and confer to the mix a delayed workability.
Ecological Flux oils
The ecological flux oils guarantee the manufacturing of a perfectly plastic and workable cold mix either in heap or in bag. The component's vegetal nature are ecological and they respect human and environment safety.
Cold Mix in Bags
Cold plastic mix for road maintenance produced with ecological flux oils.
Anionic, cationic and non-ionic surface-active for traditional and special bituminous emulsion production.
Traditional and special bitumen emulsions
Traditional and special emulsions for the realisation of tack-coat, impregnation, cold recycling, Slurry-seal, mono-double layer, bituminous paste, etc.
Synthetic latex modify the bitumen's physical structure by improving the characteristics (rheological properties, penetration, springback, Fraass, etc.).
Fibres thicken the bitumen in the pavements type Antiskid, Porous, SMA
Polymers for bitumen
The polymers for bitumen modify the physical structure improving the characteristics (rheological properties, penetration, springback, Fraass, etc.).
Stabilisers for Modified Bitumen
The stabilisers for modified bitumen are used to stabilise the bitumen mixture – polymer (modified bitumen) and increase the SBS polymerisation.
Polymers for Mix Modification
These type of polymers modify the bitumen's physical structure by improving the characteristics (rheological properties, penetration, springback, Fraass, etc.).
Products such as anti-adhesives and stabilisers, fluidising additives for fuel oils and detergents for incrusted mix.
Additive for warm mixes
Iterlow is a technology based on a liquid product, that, added to bitumen allows to decreases the production temperature of over 40°C, limits the gas emissions that cause the greenhouse effect and reduces fuel consumption.
Anti-smog Surface Treatments
Anti-smog surface treatment composed of specific titanium dioxide for mixes. Eliminates the exhaust gases. Reduces air pollution caused by vehicles, industries and domestic heating.
Environmentally friendly anti-frost additive. Lowers the freezing temperature of water Disturbs the formation of ice crystals. Delays the formation of slippery coating cause by snow and ice..
Additive to eliminate the mix odour
Odourless additive for bitumen whose mixture is capable to eliminate the odor of hot bitumen.
ITERSILENS a new concept road pavement that can reduce the noise of five-six decibels, enough to make them more bearable. Some of the components of the phono-absorbant mix are from recycled materials such as: plastic copolymers, rubber granules from recycled tires, antistripping agents. The use of these materials contributes, in addition to the acoustic improvement, to environmental conservation. hello